SIKO Actuator AG25/IE

Housing	Glass-fiber reinforced plastic / zinc die-cast
Operating Voltage	24 V DC ±% 10
Type of Connection	M12 plug connectors (A-coded)
Type of Battery	CR2477N, 3 V lithium, 950 mAh
Ambient Temperature	0 … 45 °C
Storage Temperature	-20 … 60 °C
Protection Category	IP54, IP65
Shock Resistance	500 m/s2, 8 ms
Vibration Resistance	<100 m/s2, 5 … 150 Hz

Feature	Technical data	Additional information
Shaft	stainless steel
Housing	glass-fiber reinforced plastic / zinc die-cast
Clamping ring	stainless steel
Torque pin	stainless steel	form A
	stainless steel	form B
Nominal torque/rated speed	5 Nm at 50 rpm ±10 %	i = 98
	3 Nm at 75 rpm ±10 %	i = 66
Operating mode	intermittent duty S3: 25% DC, 10 min.	EN 60034-1

Feature	Technical data	Additional information
Operating voltage	24 V DC ±10 %	reverse polarity protected, output stage
	24 V DC ±10 %	reverse polarity protected, control
Current consumption	2.2 A ±10 %	at nominal torque/speed (output stage)
	<150 mA	starting current >150 mA (control)
Power input	≤58 W	output stage
	≤3.6 W	control
Battery	CR2477N, 3 V lithium, 950 mAh
Battery service life	~5 year(s)	depending on ambient conditions
Digital inputs	17 … 30 V DC	typically 10 mA
Status display	8 LEDs
Keys	2 internal keys, internal DIP switch
Switching outputs	24 V DC ±10 %	≤40 mA
Bus connection	EIP-EtherNet/IP
	EPN-PROFINET
	ECT-EtherCAT
	EPL-POWERLINK
Type of connection	2x M12 plug connectors (A-coded)	4-pole, 1x pin; 8-pole, 1x pin
	2x M12 plug connectors (D-coded)	4-pole, 2x socket
	grounding via flat connector 6.3 mm