SIKO AG06 Actuator

Housing	Glass-fiber reinforced plastic
Weight	0.9 kg
Operating Voltage	24 V DC ±% 10
Type of Connection	M8 + M12 connector
Type of Battery	CR2477N, 3 V Lithium, 950 mAh
Interface	RS485
Repeat Accuracy	± 1
Ambient Temperature	0 … 45 °C
Storage Temperature	-20 … 60 °C
Protection Category	IP54, IP65
Shock Resistance	500 m/s2, 11 ms
Vibration Resistance	<100 m/s2, 5 … 150 Hz

Feature	Technical data	Additional information
Shaft	stainless steel
Housing	glass-fiber reinforced plastic
Clamping ring	stainless steel
Torque pin	stainless steel
Nominal torque/rated speed	7 Nm at 30 rpm ±10 %	i = 188
	13 Nm at 15 rpm ±10 %	i = 368 (14 Nm temporarily adm. break-away torque)
Operating mode	S3 intermittent duty: 25 % DC, 10 min.	EN 60034-1
Weight	~0.9 kg

Feature	Technical data	Additional information
Operating voltage	24 V DC ±10 %	reverse polarity protected, output stage
	24 V DC ±10 %	reverse polarity protected, control
Current consumption	2.42 A	max. adm. at set point 100% (output stage)
Power input	~48 W	output stage
Battery	CR2477N, 3 V lithium, 950 mAh
Battery service life	~5 year(s)	depending on environmental conditions
Rated current	2.2 A ±10 %	at max. adm. torque (output stage)
	<60 mA	at 24 V DC (control)
Display/display range	5-digit LCD 7-segment, ~7 mm height	decimal points, 2 rows, special characters
Special character	battery, direction arrows
Status display	two LEDs
Keys	parameterizing, resetting, inching, setpoint definition
Bus connection	RS485; CANopen	no galvanic isolation
Type of connection	1x M12-plug connector (A-coded)	4-pole, 1x pin
	2x M8 plug connectors	4-pole, 1x socket, 1x pin
	grounding via flat connector 6.3 mm