| Feature | Technical data | Additional information |
| Sensor/band reading distance | 0.1 … 0.4 mm | O, I reference signals |
| 0.1 … 0.2 mm | RB reference signal | |
| Cable sheath | PUR, suitable for drag-chain use | 6, 8-core ø5-0.4 mm |
| Cable bending radius | 5x cable diameter | static |
| 7.5x cable diameter | dynamic | |
| Service life of cable | >5 Million cycles | Under the following test conditions: |
| Housing | zinc die-cast | ZM, ZML design |
| Feature | Technical data | Additional information |
| Operating voltage | 6.5 … 30 V DC | reverse polarity protection |
| 4.75 … 6 V DC | no reverse polarity protection | |
| Current consumption | <25 mA | unloaded |
| Output circuit | LD (RS422) | |
| Output signals | A, /A, B, /B, I, /I or R, /R | |
| Output signal level high | >2.5 V | |
| Output signal level low | <0.5 V | |
| Latency | 1.5 µs | |
| Pulse width of reference signal | 1 or 4 increment(s) | |
| Real-time requirement | speed-proportional signal output | |
| Type of connection | open cable end | |
| plug connector | 7/8-pole | |
| D-Sub | 9-pole |
| Feature | Technical data | Additional information |
| Pole length | 1 mm | |
| Resolution | 0.2, 1, 2, 5 µm | |
| Linearity deviation | ±2 µm at TU = 20° C | 0.2 mm sensor/strip reading distance |
| Repeat accuracy | ±1 µm | |
| Measuring range | ∞ | |
| Travel speed | Dependent on resolution and pulse interval | see table |
| Feature | Technical data | Additional information |
| Ambient temperature | -10 … 70 °C | |
| Storage temperature | -30 … 80 °C | |
| Relative humidity | 100% | condensation admissible |
| EMC | EN 61000-6-2 | interference resistance / immission |
| EN 61000-6-4 | emitted interference / emission | |
| Protection category | IP67 | EN 60529 |
| Shock resistance | 500 m/s², 11 ms | EN 60068-2-27 |
| Vibration resistance | <100 m/s², 5 … 150 Hz | EN 60068-2-6 |
