SIKO MSK5000 Manyetik Sensör – ±20 µm – LineDriver (LD) / TTL Push-Pull (PP) / HTL

  • max. resolution 1 μm
  • Repeat accuracy ±0.01 mm
  • Repeat accuracy ±1 increment
  • LED status display
  • Works with magnetic tape MB500/1, magnetic ring MR500, magnetic band ring MBR500
  • Reading distance ≤2 mm
  • max. 200000 pulses/revolution in conjunction with MR500 or MBR500 (160 poles)
  • optionally with reference point R or flexible reference marks FR

Mechanical Data

Feature Technical data Additional information
Sensor/band reading distance 0.1 … 2 mm O, I reference signals
  0.1 … 1.5 mm R reference signal
  0.4 … 1 mm FR reference signal
Sensor/ring reading distance 0.1 … 2 mm O, I reference signals
  0.1 … 1.5 mm R reference signal
Cable sheath PUR, suitable for drag-chain use 6, 8-core ø5-0.4 mm
Cable bending radius 5x cable diameter static
  7.5x cable diameter dynamic
Service life of cable >5 Million cycles Under the following test conditions:
Housing black plastic K design
  zinc die-cast ZM, ZML design

Electrical Data

Feature Technical data Additional information
Operating voltage 6.5 … 30 V DC reverse polarity protection
  4.75 … 6 V DC no reverse polarity protection
Current consumption <25 mA at 24 V DC unloaded
  <75 mA loaded
Output circuit PP, LD (RS422)  
Output signals A, /A, B, /B, I, /I, R, /R, FR, /FR  
Output signal level high >UB -2.5 V PP
  >2.5 V LD
Output signal level low <0.8 V  
Latency 1.5 µs  
Pulse width of reference signal 1 or 4 increment(s)  
Real-time requirement speed-proportional signal output  
Type of connection open cable end  
  plug connector 7/8-pole
  D-Sub 9-pole

System Data

Feature Technical data Additional information
Pole length 5 mm  
Resolution 0.001, 0.005, 0.01, 0.025, 0.05, 0.1 mm
Scaling factor 12.5, 25, 50, 125, 250, 1250  
Linearity deviation ±20 µm at TU = 20° C 1 mm sensor/strip reading distance
Repeat accuracy ±10 µm  
Measuring range ∞  
Circumferential speed Dependent on resolution and pulse interval see table
Travel speed Dependent on resolution and pulse interval see table

 

Ambient Conditions

Feature Technical data Additional information
Ambient temperature -10 … 70 °C  
Storage temperature -30 … 80 °C  
Relative humidity 100% condensation admissible
EMC EN 61000-6-2 interference resistance / immission
  EN 61000-6-4 emitted interference / emission
Protection category IP67 EN 60529
Shock resistance 500 m/s², 11 ms EN 60068-2-27
Vibration resistance <100 m/s², 5 … 150 Hz EN 60068-2-6

Technical Drawing