SIKO MSK2000 Manyetik Sensör – LineDriver (LD) / TTL Push-Pull (PP) / HTL

  • Linear resolution 0.25 mm
  • Repeat accuracy ±1 increment
  • Operating voltage 5 or 24 V
  • Works with magnetic tape MB2000
  • Reading distance ≤10 mm

Mechanical Data

Feature Technical data Additional information
Sensor/band reading distance 1 … 10 mm  
Cable sheath PUR, suitable for drag-chain use 4-core ø 4.4-0.4 mm | 6, 8-core ø 5-0.4 mm
Cable bending radius 5x cable diameter static
  7.5x cable diameter dynamic
Service life of cable >5 Million cycles Under the following test conditions:
Housing light green plastic  

 

Electrical Data

Feature Technical data Additional information
Operating voltage 10 … 30 V DC reverse polarity protection
  5 V DC ±5 % no reverse polarity protection
Current consumption <50 mA PP, unloaded
  <25 mA LD
Output circuit PP, LD (RS422)  
Output signals A, /A, B, /B, I, /I 90° off-phase
Output signal level high UB – 2.5 V PP
  RS422 specific LD
Output signal level low <0.8 V PP
  RS422 specific LD
Latency 1.5 µs  
Pulse width of reference signal 1 Increment(s)  
Real-time requirement speed-proportional signal output  
Type of connection open cable end  
  plug connector 7/8-pole

 

System Data

Feature Technical data
Resolution 0.25, 1 mm
System accuracy ±(1 + 0.03 x L) mm, L in m at TU = 20° C
Repeat accuracy ±1 Increment(s)
Measuring range
Travel speed ≤25 m/s

 

Ambient Conditions

Feature Technical data Additional information
Ambient temperature -10 … 70 °C  
Storage temperature -30 … 80 °C  
Relative humidity 100% condensation admissible
EMC EN 61000-6-2 interference resistance / immission
  EN 61000-6-4 emitted interference / emission
Protection category IP67 EN 60529
Shock resistance 500 m/s², 11 ms EN 60068-2-27
Vibration resistance <100 m/s², 5 … 150 Hz EN 60068-2-6

 

Technical Drawing